What makes the Ledicode an ultimate finish?
A detailed list of requirements has eventuated in the formulation of the Ledicode, all that without skipping any section:
1. Ultra-durability
2. Remarkable wood appearance
3. Zero VOC's, 100% food safe
4. Simple and practical application
5. Low to zero residual odor
6. Short polymerization
7. Applicable on various materials including preceding finishes
8. Suitable for outdoor conditions
It took us dozens (maybe hundreds...) of customers who thoroughly tested the Ledicode on different products, made of different materials under different conditions, and after a few months we were able to tell that ALL the prerequisites of the Ledicode were labeled with a green checkmark.
The Ledicode can be applied on various materials, among them:
Wood, Plasters, Brick, Clay, Stones, Plastics, Epoxy, Metals
The preliminary academic research yielded a new material.
100% natural and food safe but completly innovative in the field of finishes.
Though even without
conforms with:
USA - FD&C Act and the FDA's regulations, CPSC under FHSA and the CPSIA
Europe - EPSA, EC
Australia - FSANZ, ACCC
Ledicode
How to apply LEDICODE on wood:
a) Stir the Ledicode well to high fludity and even consistency.
b) Use a non-woven pad to apply the Ledicode evenly in circular motions and then along the grain, leaving little residue. Try to "listen" to the wood to provide as much Ledicode as it can absorb.
c) After beginning application of the first coat, wait 40-50 minuts to remove any excess. After applying further coats, remove excess after 10-15 minuts.
d) To remove excess: Buff the surface thoroughly using only a clean bath towel, until it is completely dry.
e) Wait 24 hours, or more, between coats.
f) Apply only two coats unless the wood soaks up large amounts of oil before full saturation.
g) Dispose application pads and towels after oil's full curing.
